Product ID: DCM 039
AC/ DC 200A Clamp Meter ( DCM 039)
Auto Ranging + Bar Graph.
Specifications:
- Specifications (23 +/- 5 deg C).
- DCA 0-40A 10mA +/- 1.0% +/- 2dgts.
- DCA 0-150A 100mA +/- 1.0% +/- 2 dgts.
- DCA 150-200A 100mA -2.2% +/- 2 dgts.
- ACA 0-40A 10mA +/- 1.0% +/- 3 dgts.
- ACA 0-150A 100mA +/- 1.0% +/- 3 dgts.
- ACA 150-200A 100mA -2.2% +/- 3 dgts.
- DCV 0-400V 0.1 V +/- 1.0% +/- 2 dgts.
- ACV 0-400V 0.1 V +/- 1.0% +/- 2 dgts.
- 0 Ohm-400 Ohm 0.1 Ohm +/- 1.0% +/- 2dgts beep if < 40 Ohm (approx.).
- Hz 0-1000KHz 0.1-100 +/- 0.5% +/- 2dgts 1V sensitivity auto range.
- General specification
- Conductor size: 23mm max. (approx.).
- Battery type: Two 1.5V SUM-3.
- Display: 3 3 / 4 LCD with 40 seg. bar graph.
- Range selection: Manual.
- Overload indication: Left most digit blinks.
- Power consumption: 10 mA (approx.).
- Low battery indication.
- Sampling time: 2 times / sec. (display); 20 times / sec. (bar graph).
- Operating temperature: -10 deg C to 50 deg C.
- Operating humidity: less than 85% relative.
- Altitude: Up to 2000M.
- Storage temperature: -20 to 60 deg C.
- Storage humidity: Less than 75% relative.
- Dimension
- 183mm (L) x 63.6mm (W) x 35.6mm (H).
- 7.2 inch (L) x 2.5 inch (W) x 1.4 inch (H).
- Weight: 190g (battery included).
- Accessories
- Carrying bag x 1.
- Users manual x 1.
- 1.5V battery x 2.
Features:
- Accurate DC / AC digital clamp meter for current measurement.
- 10mA high resolution on 40A DC / AC range.
- One touch zero for DCA adjustment.
- 23 mm diameter jaw.
- Large 3 3 / 4 digits LCD.
- Fast bar graph display (20 times / sec.) for transient observation.
- Continuity and frequency measurements.
- Max / min and data hold functions.
- 600V overload protection for ohm measurement.
- Easy single rotary switch for any function selection.
- Ideal for works in crowded switch box or cable areas.
Copyright © 2009 Tecpel Co., Ltd. All rights reserved.
or 
