menu
search product Keywords Only search title


Product ID: GOS - 6112 / 6103 / 6103C
Inquire now or Add to Cart



Inquire now or Add to Cart

100MHz Oscilloscope ( GOS - 6112 / 6103 / 6103C)

Cursor readout analog oscilloscope.

Specifications:

  • CRT
    • Type: 6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV = 1cm).
    • Phosphor: P31.
    • Accelerating potential: 16 kV approx. (GOS-6103 / GOS-6103C), 12kV approx. (GOS-6112).
    • Illumination: Continuously adjustable (GOS-6103/GOS-6103C).
    • Z-axis input
      • Coupling: DC.
      • Sensitivity: 5V or more.
      • Maximum input voltage: 30V (DC + AC peak) at 1kHz or less.
      • Bandwidth: DC ~ 5MHz.
  • Vertical system
    • Sensitivity: 2mV ~ 5V / DIV, 11 step in 1-2-5 sequence.
    • Sensitivity accuracy: < 3% (5 DIV at the center of display).
    • Vernier vertical aensitivity: Continuously variable to 1 / 2.5 or less panel-indicate value.
    • Bandwidth (-3dB): DC ~ 100MHz (2mV / DIV: DC ~ 20MHz).
    • Rise time: 3.5nS (2mV / DIV: 17.5 nS).
    • Signal delay: Leading edge can be monitored.
    • Max. input voltage: 400V (DC + AC peak) at 1kHz or less.
    • Input coupling: AC, DC, GND.
    • Input impedance: 1M Ohm +2%// approx. 25pF.
    • Vertical mode: CH1, CH2, DUAL (CHOP / ALT), ADD, CH2 INV.
    • Bandwidth limited: 20MHz.
    • Common-mode rejection ratio: 50 : 1 or better at 50kHz.
    • Dynamic range
      • 8 div at 60MHz; 5 div at 100MHz (GOS-6112).
      • 8 div at 100MHz (GOS-6103 / GOS-6103C).
  • Horizontal system
    • Horizontal modes: MAIN (A), ALT, DELAY (B).
    • A (main) sweep time: 50nS ~ 0.5S / DIV, continuously variable (UNCAL).
    • B (delay) sweep time: 50nS ~ 50mS / DIV.
    • Accuracy: +3% (+5% at x 10 MAG).
    • Sweep magnification: x 10 (maximum sweep time 5nS / DIV).
    • Hold off time: Variable.
    • Delay time: 1 micro sign S ~ 5S.
    • Delay jitter: Better than 1:20000.
    • Alternate separation: variable.
  • Trigger
    • Trigger modes: AUTO, NORM, TV.
    • Trigger source: CH1, CH2, LINE, EXT.
    • Trigger coupling: AC, DC, HFR, LFR.
    • Trigger slope: '+' or '-' polarity or TV sync polarity.
    • Trigger sensitivity:
      • AUTO
        • Frequency: 10Hz~20MHz.
        • INT: 0.35 DIV.
        • EXT: 50 mV.
      • AUTO
        • Frequency: 20MHz~100MHz.
        • INT: 1.5 DIV 50 mV.
        • EXT: 150 mV.
      • NORM
        • Frequency: DC~20MHz.
        • INT: 0.35 DIV.
        • EXT: 50 mV.
      • NORM
        • Frequency: 20MHz~100MHz.
        • INT: 1.5 DIV.
        • EXT: 150 mV.
      • TV
        • Frequency: 20MHz~100MHz.
        • INT: 1 DIV.
        • EXT: 200 mV pp.
    • TV Sync: TV-V, TV-H
    • Max. external input voltage: 400V (DC + AC peak) at 1kHz.
    • External input impedance: 1M Ohm + 5%, // approx. 25pF
  • X-Y operation
    • Mode
      • X-axis: selectable CH1, CH2, EXT.
      • Y-axis: selectable CH1, CH2, CH1 and CH2.
    • Sensitivity accuracy: 2mV ~ 5V / DIV + 3%; EXT: 0.1V / DIV + 5%.
    • X-axis bandwidth: DC ~ 500kHz (-3dB).
    • Phase error: 3 degrees or less from DC ~ 50kHz.
  • Output signal
    • Trigger signal output
      • Voltage: approx. 25mV / DIV into 50 Ohm.
      • Frequency response: DC ~ 10MHz.
    • Calibrator output: 1kHz squarewave, 2Vpp + 2%.
  • Cursor readout function
    • Cursor measurement function: V, V%, VdB, T, 1 / T, T%, Dia.
    • Cursor resolution: 1 / 100 DIV.
    • Effective cursor range: vertical: + 3DIV; horizontal: + 4DIV.
    • Panel setting display:
      • Vertical: V / DIV (CH1, CH2), UNCAL, ALT / CHOP / ADD, INV, probe factor, AC / DC / GND.
      • Horizontal: S / DIV (MTB, DTB), UNCAL, x 10MAG, delay time, HO.
      • Trigger: Source, coupling, slope, level, TV-V, TV-H.
      • Others: X-Y, lock, save / recall MEM 0-9 (GOS-6103 / GOS-6103C).
  • Auto measurement function (GOS-6103C)
    • Parameter function: FREQ, PERIOD, +WIDTH, +DUTY (+ or - polarity selected by trigger slope).
    • Display digits: Max. 6-digits, decimal.
    • Frequency range: 50Hz ~ 100MHz.
    • Accuracy: 1kHz ~ 100MHz: +0.01%; 50Hz ~ 1kHz: +0.05%.
    • Measuring sensitivity: > 2 div (measuring source selected from CH1 and CH2 as synchronous signal sources).
  • Special function
    • Time / DIV auto range: Provided (GOS-6103 / GOS-6103C).
    • Panel setting save & recall: 10 sets (GOS-6103 / GOS-6103C).
    • Panel setups lock: Provided.
  • Power source: AC 100V / 120V / 230V + 10%, 50 / 60Hz.
  • Accessories
    • Power cord x 1.
    • Instruction manual x 1.
    • Probes (10:1 / 1:1) x 2.
  • Dimensions & weight: 310 (W) x 150 (H) x 455 (D) mm; approx. 9kg.


Features:

  • 100 MHz, dual channel, delayed sweep.
  • Built-in 6 digit universal counter (GOS-6103C).
  • 10 sets memory for front panel setting save & recall (GOS-6103 / GOS-6103C).
  • Time base auto-range (GOS-6103 / GOS-6103C).
  • Cursor readout with 7 measurements.
  • Panel setup lock of digital-control functions.
  • Buzzer alarm.
  • LED indicators.
  • TV synchronization.
  • Trigger signal output.
  • Z-axis modulation input.
  • SMD technology, high stability and reliability.


Contact Detail

Address:4F-1, No. 225, Sec. 3, He-Ping East Road Taipei, 110 Taiwan
TEL:886-2-27375866
FAX:886-2-27373343
Email:sales@tecpel.com ; tecpel@seed.net.tw
URL:http://www.tecpel.com http://www.oka.com.tw

Top
Copyright © 2009 Tecpel Co., Ltd. All rights reserved.