Home Showroom Oscilloscopes

Product ID: GOS - 6112 / 6103 / 6103C

100MHz Oscilloscope ( GOS - 6112 / 6103 / 6103C)

Cursor readout analog oscilloscope.

Specifications:

• CRT
  • Type: 6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV = 1cm).
  • Phosphor: P31.
  • Accelerating potential: 16 kV approx. (GOS-6103 / GOS-6103C), 12kV approx. (GOS-6112).
  • Illumination: Continuously adjustable (GOS-6103/GOS-6103C).
  • Z-axis input
    • Coupling: DC.
    • Sensitivity: 5V or more.
    • Maximum input voltage: 30V (DC + AC peak) at 1kHz or less.
    • Bandwidth: DC ~ 5MHz.
• Vertical system
  • Sensitivity: 2mV ~ 5V / DIV, 11 step in 1-2-5 sequence.
  • Sensitivity accuracy: < 3% (5 DIV at the center of display).
  • Vernier vertical aensitivity: Continuously variable to 1 / 2.5 or less panel-indicate value.
  • Bandwidth (-3dB): DC ~ 100MHz (2mV / DIV: DC ~ 20MHz).
  • Rise time: 3.5nS (2mV / DIV: 17.5 nS).
  • Signal delay: Leading edge can be monitored.
  • Max. input voltage: 400V (DC + AC peak) at 1kHz or less.
  • Input coupling: AC, DC, GND.
  • Input impedance: 1M Ohm +2%// approx. 25pF.
  • Vertical mode: CH1, CH2, DUAL (CHOP / ALT), ADD, CH2 INV.
  • Bandwidth limited: 20MHz.
  • Common-mode rejection ratio: 50 : 1 or better at 50kHz.
  • Dynamic range
    • 8 div at 60MHz; 5 div at 100MHz (GOS-6112).
    • 8 div at 100MHz (GOS-6103 / GOS-6103C).
• Horizontal system
  • Horizontal modes: MAIN (A), ALT, DELAY (B).
  • A (main) sweep time: 50nS ~ 0.5S / DIV, continuously variable (UNCAL).
  • B (delay) sweep time: 50nS ~ 50mS / DIV.
  • Accuracy: +3% (+5% at x 10 MAG).
  • Sweep magnification: x 10 (maximum sweep time 5nS / DIV).
  • Hold off time: Variable.
  • Delay time: 1 micro sign S ~ 5S.
  • Delay jitter: Better than 1:20000.
  • Alternate separation: variable.
• Trigger
  • Trigger modes: AUTO, NORM, TV.
  • Trigger source: CH1, CH2, LINE, EXT.
  • Trigger coupling: AC, DC, HFR, LFR.
  • Trigger slope: '+' or '-' polarity or TV sync polarity.
  • Trigger sensitivity:
    • AUTO
      • Frequency: 10Hz~20MHz.
      • INT: 0.35 DIV.
      • EXT: 50 mV.
    • AUTO
      • Frequency: 20MHz~100MHz.
      • INT: 1.5 DIV 50 mV.
      • EXT: 150 mV.
    • NORM
      • Frequency: DC~20MHz.
      • INT: 0.35 DIV.
      • EXT: 50 mV.
    • NORM
      • Frequency: 20MHz~100MHz.
      • INT: 1.5 DIV.
      • EXT: 150 mV.
    • TV
      • Frequency: 20MHz~100MHz.
      • INT: 1 DIV.
      • EXT: 200 mV pp.
  • TV Sync: TV-V, TV-H
  • Max. external input voltage: 400V (DC + AC peak) at 1kHz.
  • External input impedance: 1M Ohm + 5%, // approx. 25pF
• X-Y operation
  • Mode
    • X-axis: selectable CH1, CH2, EXT.
    • Y-axis: selectable CH1, CH2, CH1 and CH2.
  • Sensitivity accuracy: 2mV ~ 5V / DIV + 3%; EXT: 0.1V / DIV + 5%.
  • X-axis bandwidth: DC ~ 500kHz (-3dB).
  • Phase error: 3 degrees or less from DC ~ 50kHz.
• Output signal
  • Trigger signal output
    • Voltage: approx. 25mV / DIV into 50 Ohm.
    • Frequency response: DC ~ 10MHz.
  • Calibrator output: 1kHz squarewave, 2Vpp + 2%.
• Cursor readout function
  • Cursor measurement function: V, V%, VdB, T, 1 / T, T%, Dia.
  • Cursor resolution: 1 / 100 DIV.
  • Effective cursor range: vertical: + 3DIV; horizontal: + 4DIV.
  • Panel setting display:
    • Vertical: V / DIV (CH1, CH2), UNCAL, ALT / CHOP / ADD, INV, probe factor, AC / DC / GND.
    • Horizontal: S / DIV (MTB, DTB), UNCAL, x 10MAG, delay time, HO.
    • Trigger: Source, coupling, slope, level, TV-V, TV-H.
    • Others: X-Y, lock, save / recall MEM 0-9 (GOS-6103 / GOS-6103C).
• Auto measurement function (GOS-6103C)
  • Parameter function: FREQ, PERIOD, +WIDTH, +DUTY (+ or - polarity selected by trigger slope).
  • Display digits: Max. 6-digits, decimal.
  • Frequency range: 50Hz ~ 100MHz.
  • Accuracy: 1kHz ~ 100MHz: +0.01%; 50Hz ~ 1kHz: +0.05%.
  • Measuring sensitivity: > 2 div (measuring source selected from CH1 and CH2 as synchronous signal sources).
• Special function
  • Time / DIV auto range: Provided (GOS-6103 / GOS-6103C).
  • Panel setting save & recall: 10 sets (GOS-6103 / GOS-6103C).
  • Panel setups lock: Provided.
• Power source: AC 100V / 120V / 230V + 10%, 50 / 60Hz.
• Accessories
  • Power cord x 1.
  • Instruction manual x 1.
  • Probes (10:1 / 1:1) x 2.
• Dimensions & weight: 310 (W) x 150 (H) x 455 (D) mm; approx. 9kg.

Features:

• 100 MHz, dual channel, delayed sweep.
• Built-in 6 digit universal counter (GOS-6103C).
• 10 sets memory for front panel setting save & recall (GOS-6103 / GOS-6103C).
• Time base auto-range (GOS-6103 / GOS-6103C).
• Cursor readout with 7 measurements.
• Panel setup lock of digital-control functions.
• Buzzer alarm.
• LED indicators.
• TV synchronization.
• Trigger signal output.
• Z-axis modulation input.
• SMD technology, high stability and reliability.

Contact Detail

Address:4F-1, No. 225, Sec. 3, He-Ping East Road Taipei, 110 Taiwan
TEL:886-2-27375866
FAX:886-2-27373343
Email:sales@tecpel.com ; tecpel@seed.net.tw
URL:http://www.tecpel.com http://www.oka.com.tw