Home Showroom Function Generators

Product ID: FG 15

15 MHz Function Generator 100MHz Counter ( FG 15)

Specifications:

• Function generator
  • Waveforms: Triangle, square, sine, TTL sync out, asymmetry, ramp up, log waveforms and DC.
  • Function output range: 0.2Hz ~ 15MHz.
  • TTL output range: 0.2Hz ~ 90MHz.
  • Resolution: 4 digits.
  • Symmetry / duty cycle:
    • 20% to 80% up to 1MHz.
    • 40% to 60% up to 10MHz.
  • Impedance: 50 Ohm +/- 5%.
  • Amplitude:
    • +/- 10V into open circuit.
    • +/- 5V into 50 Ohm.
  • DC offset: +/- 10V into open circuit; +/- 5V into 50 Ohm.
  • Square wave: Rise or fall time < 15nS at full amplitude (50 Ohm).
  • Aberrations: < 5% ov V p at full amplitude (50 Ohm).
  • Triangle linearity error: 99% up to 100KHz.
  • Sine wave distortion: < -30 dB when f < 2MHz.
  • Sync output: TTL logic clock 0.2Hz ~ 90MHz.
  • Sweep width: Lin or log during selecting range.
  • Sweep rate: 0.2Hz ~ 100Hz (5 sec to 10m sec).
  • VCG characteristics
    • Control range: Max input 0 to 1.8V DC for selecting range.
    • Input impedance: 2 K ohm +/- 1%.
  • Function output protection < 20 V Peak on 'function out' terminals.
• Frequency counter
  • Range:
    • 0.2Hz ~ 100MHz (standard).
    • 100MHz ~ 2GHz (option).
  • Accuracy: +/- 5 count + time base error.
  • Resolution: 4 digits for external counter; 7 1 / 2 digits for external counter.
  • LPF: Auto or manual mode.
  • Time base: 36.864MHz +/- 25PPM (23.5 deg C +/- 5 deg C).
  • Attenuation sensitivity:
    • Optional TCXO time base (+/- 2.5ppm) x 1 (ATT off): x 20 (ATT on).
    • Standard: 0.2Hz ~ 75MHz / -22 dbm @ 50 Ohm typical: 76M ~ 100MHz / -15 dbm @ 50 Ohm typical.
    • Option: 100M ~ 2 GHz / -10 dbm @ 50 Ohm typical.
• Duty cycle measurement (TTL level only)
  • Resolution: 3 digits.
  • Accuracy: 3% + 10 counts 5Hz < f < 10 MHz.
• General
  • Power source: AC 115 / 230V; 50 / 60 Hz.
  • Operating temp: 0 to 40 deg C; < 80% RH.
  • Storage temp: -20 deg to 70 deg C.
  • Dimensions: 300mm x 220mm x 150mm (11.8 inch x 8.7 inch x 5.9 inch) (D x W x H).
  • Accessories: Power cord x 1; instruction manual x 1.

Features:

• Rotary menu driven pop up and down function for easy operation.
• TTL output up to 90 MHz.
• Low noise signal source.
• Optional 2GHz frequency counter.
• Triangle, square, sine, TTL sync out, asymmetry, ramp up, log waveforms and DC.
• Duty cycle up to 15MHz for TTL, resolution 0.1%.
• Amplitude attenuation -60db.

Contact Detail

Address:4F-1, No. 225, Sec. 3, He-Ping East Road Taipei, 110 Taiwan
TEL:886-2-27375866
FAX:886-2-27373343
Email:sales@tecpel.com ; tecpel@seed.net.tw
URL:http://www.tecpel.com http://www.oka.com.tw